Protect uptime, optimize performance, and reduce environmental impact.
Intelligent water management and water cooling systems are at the heart of data centers, and they play a vital role in reducing environmental impact. As demand increases, so do demands on reliability, efficiency, and responsible resource use, and you can count on Duff Co. as a key supplier to help meet those goals.

Grundfos’ advanced pumping solutions are engineered to meet high-demand requirements of data centers, so these energy-efficient, modular systems integrate pumps, drives, sensors and control units for seamless operation. With high-efficiency variable-speed pumps, fast ramp-up capabilities and intelligent monitoring, you can ensure reliable performance, minimal downtime and maximum operational efficiency.
Take a deeper look at how you can meet performance, sustainability and uptime goals with these intelligent solutions. Explore technologies for cooling, treatment, and water and heat reuse, with a proven track record.
Cooling
For a typical data center, cooling alone can account for up to 38% of a data center’s energy use, creating a pressing need for systems that improve efficiency, cut costs, and reduce environmental impact.
We help design advanced cooling systems that deliver consistent performance and balance energy efficiency and reliability, even under fluctuating loads. Our innovative pump solutions integrate seamlessly, offering precise variable-speed operation, fast ramp-up and changeover capabilities as well as intelligent monitoring to minimize energy waste and water consumption. With Grundfos, you can help your customers meet sustainability goals while ensuring optimal performance and uptime in even the most demanding environments.
Water Treatment
Reduce chemical & filter costs by up to 70%.
Efficient solutions for sourcing, distributing, treating and discharging water all contribute to optimizing your center’s PUE and WUE. Grundfos solutions keep water flowing efficiently around air or liquid cooling systems through an array of intelligent pumps and sensors. And monitoring of typical water quality parameters as well as precise control of chemicals and disinfection or pH adjustment is essential for water treatment processes.
Chemicals and Dosing
- Complete dosing skids tailored to your application, available as a complete package with all necessary pipework, valves and dosing pumps. We can deliver standardized packaged systems or build custom systems to your specifications.
- Digital Dosing™ solutions ensure precise, chemical-saving dosing of pH regulation chemicals as well as flocculation and anti-scaling / anti-fouling aids.
- Oxiperm® compact chlorine dioxide preparation solution disinfection in cooling systems, warm water cycles, and in combating legionella.
- Hydro Protect plug-and-play solution combines the benefits of a disinfection with a booster system.
System Integration and Monitoring
- System integration into BMS & SCADA systems, with fewer field cables, easier data point mapping, and data communication via open and interoperable networks.
- Grundfos offers the DIT hand-held photometer, and the online measuring and control system DID for full integration with digital communication and data logging.
- The chemical management app makes regulatory compliance reporting easy with cloud-based and automated functions.
Efficient Water Distribution
- Optimize energy savings by combining highly advanced controls and monitoring, such as the CU 352 control unit with highly efficient pumps like the Grundfos MPC system which offers constant pressure with advanced functionality for control.
Efficient water sourcing
- Whether water is sourced from lakes, rivers, rainwater, or municipal supply, Grundfos’ reliable and intelligent pumps and components harvest, treat and boost the water onwards.
- Harvesting systems can include cooling towers, evaporative coolers, rainwater tank systems, pumps and pressure boosters, and pump solutions for surface water intake from submersible and mixed flow pumps to efficient axial flow propellor pumps.
- Reliable firefighting and extinguishing systems through Grundfos FireConnect. This is the first cloud-based monitoring system that can detect a facility fire, alert personnel, and track its location and development.
- To achieve minimal downtime and waste water risk, Grundfos offers a full range of modular pumping stations – complete with necessary piping, valves, and level controls. We offer custom-designed systems with modular flexibility that adapts to your needs, and corrosion-free materials that make pumping stations service- and maintenance-friendly.
Sustainability
Water is the most essential resource on the planet. Without question, there is an urgent need for energy and water-efficient solutions. Yet to transition to a water-secure, net-zero future, the world faces several challenges. Amongst these are the need to move more water while using less energy, increase our resilience to the impacts of climate change, and improve access to water for all. Grundfos is committed to being part of the solution.

In this era of growing consumption, Grundfos is committed to developing products and solutions that help save natural resources, reduce climate impact, and achieve sustainability goals. Those goals are a central element to their business priorities – water stewardship, water access, climate transition, and circularity – where they aim to shape the industry in innovation and net zero impact.
Grundfos is the first water solutions company with a Science-Based Target-approved net-zero goal, and they are deeply committed to being part of the solution to climate change. In 2026, they were awarded a gold medal from EcoVadis, landing in the top 5% of more than 150,000 assessed companies for their performance across environmental impact, labor and human rights, ethics, and sustainable procurement.
Data Center Cooling and Water Treatment Products
CME

CME is a reliable, quiet and compact horizontal end-suction pump with integrated frequency converter and intelligent features. The modular pump design makes it easy to make customised solutions.
- Auto-adapting to system requirements
- Low noise level below 65 dB
- Service-friendly design; no special tools required
CRE

Vertical, multistage centrifugal pump with integrated frequency converter. The pump head and base are in cast iron – all other wetted parts are in stainless steel (EN 1.4301)
- Auto-adapting to system requirements
- Balanced cartridge shaft seal
- Water-resistant bearing material
CUE

CUE is a variable frequency drive designed for effective speed control of any Grundfos pump without integrated drives.
- Multi-pump function including alternating, back-up, or cascade function
- Differential pressure control using two sensors
- Proportional pressure and flow estimation
Hydro MPC-E (CU 352)

Booster systems with frequency-controlled pumps
- Highest efficient MGE-IE5 rated motor
- Multi-sensor function for optimal performance
- Back-flow prevention
LS

Grundfos LS is a horizontal, single-stage or double-stages, between bearings, split case pump. The axially split design allows easy removal of the top casing and access to the pump components without disturbing the motor or pipe work.
- High energy efficiency and low life cycle costs
- Double suction minimizes axial load which extends the life of the wear rings, shaft seals, and bearings
- Double Volute Design for increased efficiency, lower life cycle costs, and prolonged seal and bearing life
LSV

Grundfos LS is a vertical, single-stage or double-stages, between bearings, split case pump. The axially split design allows easy removal of the top casing and access to the pump components without disturbing the motor or pipe work.
- Vertically mounted design for space savings
- High energy efficiency and low life cycle costs
- Double Volute Design for increased efficiency, lower life cycle costs, and prolonged seal and bearing life
NB

End-suction close-coupled pumps according to EN 733
- Back pull-out design enabling easy service of the pump
- Optimized hydraulics in housing and impeller, which provides unimpeded liquid flow
- O-ring seal between pump housing and cover, which ensures no risk of leakage
NK

Standard pumps according to EN 733
- Back pull-out design enabling easy service of the pump
- Optimized hydraulics in housing and impeller, which provides unimpeded liquid flow
- O-ring seal between pump housing and cover, which ensures no risk of leakage
NKE

Standard pumps according to EN733 with frequency-controlled motors
- Back pull-out design enabling easy service of the pump
- Optimized hydraulics in housing and impeller, which provides unimpeded liquid flow
- O-ring seal between pump housing and cover, which ensures no risk of leakage
TP

Grundfos TP pumps are single-stage, close-coupled in-line centrifugal pumps with mechanical shaft seal and primely for applications such as heating/cooling/district energy. The pumps are fitted with fixed speed motors.
- Optimized hydraulics for high efficiency
- Top-pull-out design for easy service dismantling
- Improved corrosion resistance
TPE Series 2000, TPE3

Grundfos TPE Series 2000, TPE3 pumps are single-stage, close-coupled in-line centrifugal pumps with mechanical shaft seal and primely for applications such as heating/cooling/district energy. The pumps are fitted with frequency controlled motors and differential pressure transmitter.
- Auto-adapts to system requirements
- Optimized hydraulics for high efficiency
- Top-pull-out design for easy service dismantling
TPED Series 2000, TEP3 D

Grundfos TPED Series 2000, TPE3 D pumps are single-stage, close-coupled in-line centrifugal twin-head pumps with mechanical shaft seal and primely for applications such as heating/cooling/ district energy. The pumps are fitted with frequency controlled motors and differential pressure transmitter.
- Auto-adapts to system requirements
- Duty standby: Reduced downtime in service situations
- Multi-pump function for wireless control of the twin pump
DDA

SMART Digital diaphragm dosing pump with internal brushless motor drive. High-end solution for complex and demanding applications (Digital Dosing Advanced).
DID

Testing in addition to the standard performance and hydrostatic testing required by UL, FM, and NFPA 20
Oxiperm

OCD chlorine dioxide preparing and dosing system.
PS.R

The PS.R is a rotation molded range of prefabricated pumping stations in PE. This range is available from 500mm to 1700mm in sump diameter, with a depth of up to 6m. Support pumps up to 7,5kW.
SP

Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4″ over 6″ and 8″ to 10″. The motor sizes for the pumps are available in 0.37-250 kW.
- High energy efficiency
- All stainless-steel construction
- High reliability
Sensors, etc.

Pressure, flow and temperature products. Transducers, sensors, switches, meters, transmitters. Grundfos Direct Sensors and insourced products. For use across products, applications and solutions.

